ABSTRACT
Objective@#To observe the root and root canal morphology of mandibular second molars in Western Guangxi by CBCT, to provide a reference for clinical diagnosis and treatment.@*Methods@#In total, 564 patients′ 1 128 mandibular second molars that satisfy the inclusion criteria were analyzed with a planmecaromexis CBCT machine and its own image analysis software. The patients′ gender, age and ethnic differences in the root and canal morphology and the symmetry of the bilateral root and canal were statistically analyzed. @*Results@# Among the 1 128 mandibular second molars, 662 were the Zhuang ethnic group and 384 were the Han ethnic group, and 82 were other ethnic groups; the double root type and C-shaped root type accounted for a relatively high proportion: 73.94% and 24.47%, respectively. The detection rates of the double root type were higher in males than in females (P < 0.05); the detection rates of the C-shaped root type were higher in females than in males (P <0.05); the root type of the teeth was mainly double-rooted in the Zhuang ethnic group (P<0.01). The incidence of type IV in the mesial root of the double root type mandibular second molar was the highest (P < 0.01), and the incidence of type I in the distal root was the highest (P < 0.01). The C-shaped root canal is more continuous at the mouth of the root canal, more downward corresponds to a worse continuity: in three different levels of root canal orifice, root middle and root apex, the root canal orifice is dominated by the C1 type, and both root middle and root apex are mainly C3-type (P < 0.01). The difference in symmetry of bilateral roots and root canals was statistically significant among different gender groups, age groups, and ethnic groups (P < 0.05): there were more males than females, the results in the 18-35-year-old group and the Zhuang ethnic group were higher.@*Conclusion@# The root and root canal morphology of mandibular second molars in western Guangxi people are complex and changeable. The roots are mainly double root type in the Han ethnic group and the Zhuang ethnic group. C-shaped roots are also common. The detection rate of C-shaped roots in the Zhuang ethnic group was higher, and the symmetry rate of bilateral roots and that of bilateral root canals was higher in the Zhuang ethnic group than in the Han ethnic group.
ABSTRACT
Objective @#To study the anatomical characteristics of the root and root canal system of the mandibular second permanent molar in the Uygur people and provide a reference for clinical practice.@*Methods @#A total of 125 mandibular second permanent molars were extracted from Uygur patients in hospitals in the Xinjiang Uygur Autonomous Region. Three-dimensional reconstruction was performed after micro-CT scanning. The number of root canals, the root canal type (Weine classification and Fan′s C-shaped canal classification) and the occurrence of lateral accessory canals were observed.@*Results @#A sex difference was not detected in the root number or root form (χ2 = 1.277, P = 0.259). The incidence of 2-rooted molars was 70.4% (n = 88); type 2-1 canals were most common in the mesial root, with an incidence of 29.5%, followed by type 1-1 and 2-2 canals (each with an incidence of 26.1%), and the distal root mostly had a type 1-1 canal (96.6%). The incidence of single-rooted molars was 28.8%, and the frequency of C-shaped (n = 28) and non-C-shaped (n = 8) single-rooted molars was 22.4% and 6.4%, respectively. A three-rooted molar was detected in one case. The incidence of accessory canals was 65.2%.@*Conclusion @# Uygur mandibular second molars are mainly composed of two roots, and the incidence of a single root and root canal fusion is low (including C-shaped canals). Two-rooted molars frequently have two mesial canals and one distal canal.
ABSTRACT
A successful endodontic treatment requires knowledge of the internal configuration of dental root canals. Most of the people who live in Yucatan are of Maya origin, characterized by a Mongoloid dental pattern. Because of their ethnicity, variations are expected. The purpose of this investigation is to assess the morphological characteristics and variability of this population. One hundred and five extracted first mandibular premolars of Mexican Maya population were analyzed; the sample was obtained from the Oral Surgery Clinic in the School of Dentistry at the Autonomous University of Yucatan with written informed consent. Analyses were performed by means of Cone Beam Computed Tomography. Vertucci´s Type I was the most prevalent configuration with 51.4 %, but 41 cases (39.1 %) presented a radicular groove and a C-shaped canal configuration. Overall, we documented 1, 2, 3, and 4 root canals. Mandibular first premolars are very variable in the Yucatecan population. The variability and frequency of C-shape is similar to mandibular second molars confirming the importance of the ethnic background for the endodontic treatments.
El éxito en el tratamiento endodóntico requiere el conocimiento profundo de la configuración interna del sistema de conductos radiculares. La mayoría de las personas que viven en Yucatán son de origen Maya y poseen el patron dental Mongoloide; por lo tanto, se esperan variaciones debido a su etnicidad. El propósito de esta investigación fue evaluar las características morfológicas y la variabilidad del conducto radicular en la población yucateca. Se analizaron ciento cinco primeros premolars mandibulares extraídos de pacientes provenientes de una muestra Maya mexicana; la muestra fue obtenida de la Clínica de Cirugía Oral de la Facultad de Odontología de la Universidad Autónoma de Yucatán. Con consentimiendo informado escrito. Se utilizaron Tomografías Computarizadas para el análisis de la muestra. La configuración más prevalente fue la Tipo I de Vertucci con 51,4 %. Sin embargo, 41 de 105 casos (39,1 %) presentaron un surco radicular y la configuración en forma de "C". Se documentaron casos con 1, 2, 3 y 4 conductos radiculares. Los primeros premolares mandibulares de la población Yucateca son muy variables. La variabilidad y frecuencia de conductos en forma de "C" concuerda con estudios realizados en segundos molars mandibulares en esta zona confirmando la importancia del origen étnico de las poblaciones para los tratamientos endodónticos.
Subject(s)
Humans , Male , Female , Bicuspid/diagnostic imaging , Dental Pulp Cavity/diagnostic imaging , Mandible/diagnostic imaging , Bicuspid/anatomy & histology , Indians, North American , Tomography, X-Ray Computed , Dental Pulp Cavity/anatomy & histology , Mandible/anatomy & histology , MexicoABSTRACT
OBJECTIVES: The purpose of this study was to investigate the C-shaped root canal anatomy of mandibular second molars in a Korean population. MATERIALS AND METHODS: A total of 542 teeth were evaluated using cone-beam computed tomography (CBCT). The canal shapes were classified according to a modified version of Melton's method at the level where the pulp chamber floor became discernible. RESULTS: Of the 542 mandibular second molars, 215 (39.8%) had C-shaped canals, 330 (53%) had 3 canals, 17 (3.3%) had 2 canals, 12 (2.2%) had 4 canals, and 8 (1.7%) had 1 canal. The prevalence of C-shaped canals was 47.8% in females and 28.4% in males. Seventy-seven percent of the C-shaped canals showed a bilateral appearance. The prevalence of C-shaped canals showed no difference according to age or tooth position. Most teeth with a C-shaped canal system presented Melton's type II (45.6%) and type III (32.1%) configurations. CONCLUSIONS: There was a high prevalence of C-shaped canals in the mandibular second molars of the Korean population studied. CBCT is expected to be useful for endodontic diagnosis and treatment planning of mandibular second molars.
Subject(s)
Female , Humans , Male , Cone-Beam Computed Tomography , Dental Pulp Cavity , Diagnosis , Methods , Molar , Prevalence , ToothABSTRACT
Objective:To evaluate the clinical effects of CAD/CAM glass-ceramic onlays in the restoration of mandibular second molar with distal caries.Methods:56 endodontically treated molars were restored with CAD/CAM glass-ceramic onlays after one-visit root canal treatment.The effects were evaluated by one experienced clinicians in accordanced with the modified USPHS-Criteria at baseline and after 6,12 18 and 24 months.Results:All teeth were completed 2-year-follow-up.Satisfactory effects were observed in retention,marginal adaptation,color match,the secondary caries and adjacency relation.Failure in 3 cases were noted.2 onlays were extracted and 1 fractured.Conclusion:CAD/CAM glass-ceramic onlays is an effective treatment in the restoration of permanent molars with serious caries.
ABSTRACT
A thorough knowledge of the root canal morphology is required for successful endodontic therapy. One of the most important anatomic variations is the C-shaped configuration of the root canal system. The presence of high incidence of transverse anastomoses, lateral canals, and apical deltas makes it difficult to clean and seal the root canal system in these teeth and may complicate endodontic interventions. Meticulous mechanical and chemical debridement of the canal space with additional efforts is essential for complete elimination of pulpal pathology in the anatomical irregularities. Obturation of the canal space also requires special attention as obtaining a three dimensional fill of a C-shaped canal may prove to be a problem due to the various intricacies present within the root canal system. Hence, this case series presents various types of C-shaped canal morphologies of mandibular second molars and their management.
ABSTRACT
OBJECTIVES: This study aimed to evaluate the healing rate of non-surgical endodontic treatment between C-shaped and non-C-shaped mandibular second molars. MATERIALS AND METHODS: Clinical records and radiological images of patients who had undergone endodontic treatment on mandibular second molars between 2007 and 2014 were screened. The periapical index scoring system was applied to compare healing outcomes. Information about preoperative and postoperative factors as well as the demographic data of the patients was acquired and evaluated using chi-square and multinomial logistic regression tests. RESULTS: The total healing rate was 68.4%. Healing rates for the mandibular second molar were 70.9% in C-shaped canals (n = 79) and 66.6% in non-C-shaped ones (n = 117). The difference was not statistically significant. CONCLUSIONS: The presence of a C-shaped canal in the mandibular second molar did not have a significantly negative effect on healing after treatment. Instead, proper pulpal diagnosis and final restoration were indicated as having significantly greater influence on the healing outcomes of C-shaped and non-C-shaped canals, respectively.
Subject(s)
Humans , Dental Pulp Cavity , Diagnosis , Logistic Models , Molar , Retrospective StudiesABSTRACT
PURPOSE: To determine the anatomical characteristic of C-shaped canal systems in Korean mandibular 2nd molars by cone beam computed tomography (CBCT). MATERIALS AND METHODS: The 824 CBCT images were evaluated. These patients were taken CBCT for the diagnosis and treatment of dental implantation on 2013. The 711 mandibular 2nd molars were examined. The configuration of root canal systems were classified according to modified Melton's classifications. RESULTS: Of the 711 mandibular 2nd molars, 21.5% had C-shaped canal systems. This prevalence did not differ with tooth position. Most of the C-shaped canals with bilateral molars were symmetrical. Of the C-shaped canal, the most common configuration Type were Melton's Type I (89%) in the orifice level and Melton's III (83.8%) in the apical level. The prevalence of C-shaped canal was higher in female (25%) than male (13.9%) (P < 0.05). CONCLUSION: A high prevalence of C-shaped canals were observed in Korean mandibular 2nd molars. For successful C-shaped root canal treatment, the comprehension of root canal systems was important.
Subject(s)
Female , Humans , Male , Classification , Comprehension , Cone-Beam Computed Tomography , Dental Implantation , Dental Implants , Dental Pulp Cavity , Diagnosis , Molar , Prevalence , ToothABSTRACT
Three-dimensional (3D) reconstruction of cone-beam computed tomography (CBCT) scans appears to be a valuable method for assessing pulp canal configuration. The aim of this report is to describe endodontic treatment of a mandibular second premolar with aberrant pulp canal morphology detected by CBCT and confirmed by 3D modeling. An accessory canal was suspected during endodontic treatment of the mandibular left second premolar in a 21 year-old woman with a chief complaint of pulsating pain. Axial cross-sectional CBCT scans revealed that the pulp canal divided into mesiobuccal, lingual, and buccal canals in the middle third and ended as four separate foramina. 3D modeling confirmed the anomalous configuration of the fused root with a deep lingual groove. Endodontic treatment of the tooth was completed in two appointments. The root canals were obturated using lateral compaction of gutta-percha and root canal sealer. The tooth remained asymptomatic and did not develop periapical pathology until 12 months postoperatively. CBCT and 3D modeling enable preoperative evaluation of aberrant root canal systems and facilitate endodontic treatment.
Subject(s)
Female , Humans , Appointments and Schedules , Bicuspid , Cone-Beam Computed Tomography , Dental Pulp Cavity , Gutta-Percha , Pathology , ToothABSTRACT
Three-dimensional (3D) reconstruction of cone-beam computed tomography (CBCT) scans appears to be a valuable method for assessing pulp canal configuration. The aim of this report is to describe endodontic treatment of a mandibular second premolar with aberrant pulp canal morphology detected by CBCT and confirmed by 3D modeling. An accessory canal was suspected during endodontic treatment of the mandibular left second premolar in a 21 year-old woman with a chief complaint of pulsating pain. Axial cross-sectional CBCT scans revealed that the pulp canal divided into mesiobuccal, lingual, and buccal canals in the middle third and ended as four separate foramina. 3D modeling confirmed the anomalous configuration of the fused root with a deep lingual groove. Endodontic treatment of the tooth was completed in two appointments. The root canals were obturated using lateral compaction of gutta-percha and root canal sealer. The tooth remained asymptomatic and did not develop periapical pathology until 12 months postoperatively. CBCT and 3D modeling enable preoperative evaluation of aberrant root canal systems and facilitate endodontic treatment.
Subject(s)
Female , Humans , Appointments and Schedules , Bicuspid , Cone-Beam Computed Tomography , Dental Pulp Cavity , Gutta-Percha , Pathology , ToothABSTRACT
Objective:To analyze the wall thickness of C-shaped canals in permanent mandibular second molars.Methods:40 ex-tracted permanent mandibular second molars with C-shaped root were collected from native Chinese and were scanned by micro-CT scan-ner.The specimens were reconstructed three-dimensionally by software Mimics 10.01.The roots were sliced from cemento-enamel junc-tion (CEJ)to apex with 1 mm intervals.The cross-sectional root canal configurations were classified into 5 types according to the Fan's Classification.The minimum buccal wall thickness (MBWT),minimum lingual wall thickness(MLWT)and their locations,as well as the wall thickness at the mesial and distal reference sites were detected.Two-way ANOVA and post hoc LSD-t tests were used to com-pare the mean thickness at 4 sides.Results:Among 370 cross-sections of 40 C-shaped roots,C1,C2 and C3 canals were observed on 126(34.1%),46 (12.4%)and 160 (43.2%)sections respectively.Except at the 10 mm level,the mean MLWT was always lower than MBWT;and the MLWT and MBWT were always lower than the wall thickness at the mesial and distal reference sites.The differ-ence was statistically significant (P <0.05)along the root length above the 12 mm level.The MBWT of the C2 and C3 canals was more likely located at the mesial region,and the MBWT of the C1 and the MLWT of C1,C2 and C3 was more frequently located at the center region.Conclusion:The lingual wall of C-shaped canal in mandibualr second molars was the thinnest zone among four sides,and care should be taken during root canal instrumentation and post space preparation to avoid perforation.
ABSTRACT
Mandibular second molars have many variations in canal configuration. Technical modifications in cleaning, shaping and obturation are required. The purpose of this study was to investigate the root canal anatomy of mandibular second molars. 86 teeth of 85 patients were accessed and evaluated with taking radiographs for working length determination. 27 teeth(31.4%) had C-shaped canals, 43 teeth(50%) had 3 canals, 11 teeth(12.7%) had 4 canals, 5 teeth(5.8%) had 2 canals. Incidence of C-shaped canal was 31.7% in male and 31.1% in female. 30.9% of left mandibular second molar and 31.8% of right mandibular second molar showed C-shaped canals.
Subject(s)
Female , Humans , Male , Dental Pulp Cavity , Incidence , Molar , Retrospective Studies , ToothABSTRACT
The C-shaped canal system is an anatomical variation mostly seen in mandibular second molars, although it can also occur in maxillary and other mandibular molars. The main anatomical feature of C-shaped canals is the presence of fins or web connecting the individual root canals. The complexity of C-shaped canals prevents these canals from being cleaned, shaped, and obturated effectively during root canal therapy, and sometimes it leads to an iatrogenic perforation from the extravagant preparation. The purpose of this study was to provide further knowledge of the anatomical configuration and the minimal thickness of dentinal wall according to the level of the root. Thirty extracted mandibular second molars with fused roots and longitudinal grooves on lingual or buccal surface of the root were collected from a native Korean population. The photo images and radiographs from buccal, lingual, apical direction were taken. After access cavity was prepared, teeth were placed in 5.25% sodium hypochlorite solution for 2 hours to dissolve the organic tissue of the root surface and from the root canal system. After bench dried and all the teeth were embedded in a self-curing resin. Each block was sectioned using a microtome (Accutom-50, Struers, Denmark) at interval of 1 mm. The sectioned surface photograph was taken using a digital camera (Coolpix 995, Nikon, Japan) connected to the microscope. 197 images were evaluated for canal configurations and the minimal thickness of dentinal wall between canal and external wall using' Root Thickness Gauge Program' designed with Visual Basic. The results were as follows: 1. At the orifice level of all teeth, the most frequent observed configuration was Melton's Type C I (73%), however the patterns were changed to type C II and C III when the sections were observed at the apical third. On the other hand, the type C III was observed at the orifice level of only 2 teeth but this type could be seen at apical region of the rest of the teeth. 2. The C-shaped canal showed continuous and semi-colon shape at the orifice level, but at the apical portion of the canal there was high possibility of having 2 or 3 canals. 3. Lingual wall was thinner than buccal wall at coronal, middle, apical thirds of root but there was no statistical differences.
Subject(s)
Dental Pulp Cavity , Dentin , Hand , Molar , Root Canal Therapy , Sodium Hypochlorite , ToothABSTRACT
Objective To determine the prevalence of symmetry of C shaped root canal system in mandibular second molars.MethodsA total of 70 madibular second molars with C shaped root canal system to be considered as needing root canal therapy were included in this study,of which 68 contralateral X ray apical films were obtained.The symmetry of the root and the root canal system was analyzed using magnifying glass.ResultsOf the 68 mandibular second molars with C shaped root canal system diagnosed clinically,62 cases with C shaped root canal system bilaterally,with the prevalence 91.18%.ConclusionThe anatomic feature of mandibular molars with C shaped root canal system is complicated,and the prevalence of symmetry is very high,which is in favor of estimating the anatomic feature from contralateral tooth.
ABSTRACT
Objective:To compare the sealing ability and marginal adaptation of three obturation techniques when used in root canal obsturation of c-shaped canals of mandibular second molars. Methods:Twenty-one extracted mandibular second molars with C-shaped canals were randomly divided into three groups. After instrumentation, the canals were filled using three different techniques: ObturaⅡ(group A), cold lateral condensation (group B) and Thermafil (group C). Then, gaps,obturated lateral canals and reticular apical triangles on the X-ray were counted. After dyeing for 7 days in the ink, dyeing lines were measured to reflect the microleakage. The percentages of gutta-percha, sealer and gaps on the root canal surface were determined by analyzing the images of 3 sections per tooth. Results:The reticular apical triangles were most frequently observed in group C(P
ABSTRACT
Objective:To investigate the root canal anatomy of one-rooted mandibular second molars. Methods:The root canals of 18 one-rooted mandibular second molars were visualized on radiographs and clinical examination, some specimens were cut at the mid-root level and observations were made on the coronal root section. Teeth with C-shaped canal system were categorized by using a modification of Melton classification.Results:12 molars exhibited C-shaped canals.2 molars were classified as category Ⅰ,5 as Ⅱ and another 5 cases as Ⅲ.Conclusions:C-shaped canals in mandibular second molars vary in canal number and shape.